The thermo-drum is completely insulated with ceramic glass wool and covered with Stainless Steel sheet to prevent the heat losses and to save fuel as well as the life of the drum.Before the mixing zone a suitable flame guard is provided to restrict the burner flame to reach up to the mixing zone.

The special 8 mm thick 'J' type flights + ‘W’ type comb flights have been bolted in the both the zones in the zigzag / straight pattern for best mixing.

The dust collecting system mounted on same chassis allows optimum efficiency in accordance with the present ecological regulations.

The dryer and mixing drum is provided with sweep discharge chute on the side of the mixer with replaceable type chute liners and it will discharge the material directly on the load out conveyor.